• Adapter for High-speed USB 2.0
  (compatible to USB 1.1 and USB 3.0)


• Transmitting and receiving of CAN and LIN messages using 2 D-Sub connections
  (both with pin assignment for the CAN and LIN bus)


• Time stamp resolution 1 µs


• 5-Volt supply at the D-Sub connector can be activated through a solder jumper, e.g. for external bus converter


• Voltage supply via USB


• Extended operating temperature range from
  -40 to 85 °C (-40 to 185 °F)

CAN operation properties:

• Bit rates from 5 kbit/s up to 1 Mbit/s


• Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)


• MAX3057ASA CAN transceiver


• Each CAN channel is separately opto-decoupled against USB and LIN up to 500 V


• Measurement of bus load including error frames and overload frames


• Induced error generation for incoming and outgoing CAN messages

LIN operation properties:

• Bit rates from 1 kbit/s up to 20 kbit/s


• AMIS-30600 LIN transceiver


• Both LIN channels (common Ground) are opto-decoupled against USB and CAN


• Can be used as a LIN master or slave (1 ms master task resolution)


• Automatic baud rate, frame length, and checksum type recognition


• Autonomous scheduler with support for unconditional, event, and sporadic frames


• Hardware can work through a schedule table (up to 8 schedule tables can be configured with a total of 256 slots)